Science & Technology

Amber Taking A Photo Of A Organism On the first of October 2026: Amber and I went to Halden Forest which is a part of Exeter. The Sun Peaking Through The Trees When I look around the forest: I can see that the forest is a vast area full of trees. A Portrait Of The Vast Forest Leaves On A Tree Looking Up The Trees When I look up the trees: I can see how vast the trees are in comparison to me. Looking Up The Trees The Sun Peaking Through The Branches Then we walked under the py

Red LED Torch On Tripod Morse Code Switch On the very late afternoon on the 08th of September 2026: I was tinkering with morse code. I written a one page PDF here.

The old choke spring in place We re-installed the manky old choke spring back on the choke control lever. Funny enough, my dad had to try and tinker with the tightness of the old choke spring to be as close to original tightness as possible. Re-installing the cover on the engine Metal cover re-installed We then re-installed the rusty metal cover back onto the engine, and funny enough my dad had to remove the rust and dirt to be able to view the engine number on the cover. Smo

A Float Valve For A Carburetor Carburetor With New "O" Ring Fitted Carburetor With Bowl Attached Carburetor Side View First we had to install a new "o" ring onto the carburetor, and put the carburetor back together. Fuel Inlet With No Carburetor Screwing In A Bolt Re-Installing The Carburetor Then we had to re-install the carburetor onto the fuel inlet. The Throttle Spring We had to re-install the throttle spring which was the right size luckily. The Choke Lever Re-Installed

Lino prints using red and black inks! Recently, my brother and I have been creating lino prints the first one being of my logo! Funny enough, it made me realised about how I can just do things throughout the day. It also allowed me to experiment and learn about mass production. Lino prints using red and black inks! Two lino printing plates Two lino printing plates The process of making the lino plates is quite long winded where I have to scoop out the material that is not to

A broken mower awaiting repair On the 11th of August 2026: my dad & I had to repair my petrol lawnmower again, because it won't start properly any more. The missing spring between the choke & the fan controlled lever. My dad & I found that a spring that controls the choke has been broken, and that is one possible reason why it won't start properly. The throttle end. The choke end. Carburetor taken apart. My dad and I had to remove and take apart the carburetor assembly becaus

VIP Sign. Every month, the Gay Outdoor Club goes to play ten pin bowling at Torquay. On the 15th of June 2026: I was there taking photos of the group on my Canon 5D mk2 DSLR with my trusty 50mm f1.8 lens at full open aperture at a shutter speed of a 1/50th of a second. I then edited the raw files in Gimp to give them a hollywood cinematic look.